Stepper Motor Control Using the PIC16F684
Posted: Wed Jul 13, 2016 5:18 am
Stepper Motor Control Using the PIC16F684
http://ww1.microchip.com/downloads/en/A ... 00906B.pdfINTRODUCTION
This application note describes how to drive a bipolar
stepping motor with the PIC16F684. The Enhanced
Capture Compare PWM (ECCP) module is used to
implement a microstepping technique known as hightorque
microstepping. The microcontroller’s 8 MHz
internal oscillator allows the signals generated by the
ECCP module to achieve frequencies above the
audible range.