Brads Electronic Projects Forum

Posted: **Fri Mar 11, 2011 5:32 am**

Hi guys...
if im not wrong, think i read some where that u was trying to make a pov whit just 1 pic??
did it work??

Lars Selnes Norway

Posted: **Fri Mar 11, 2011 12:49 pm**

Yes,

I have written up an instructable that you can find here:

http://www.instructables.com/id/The-One ... ith-conve/

And here's a youtube video:

Posted: **Sat Mar 12, 2011 11:06 pm**

thats so cool.. nice job mr.

Posted: **Mon Mar 14, 2011 8:46 am**

Thanks!

Posted: **Thu Mar 17, 2011 7:47 am**

about the hall effect sensor.. i see on google that there are 2 types of them. one whith 3 legs and on whit 4...
is it the one whit 4 thats the one to use.. and are there one kind u like best.. im shoping parts on ebay.

Posted: **Thu Mar 17, 2011 10:51 am**

Either should be fine.

I think the one with four legs just has an enable pin. so you can choose to enable or disable the sensor.

With my circuit, I always have the sensor enabled by connecting it to vcc with a resistor.

Brads Electronic Projects Forum

8x85 RGB whit 1 Chip?

8x85 RGB whit 1 Chip?

Re: 8x85 RGB whit 1 Chip?

Re: 8x85 RGB whit 1 Chip?

Re: 8x85 RGB whit 1 Chip?

Re: 8x85 RGB whit 1 Chip?

Re: 8x85 RGB whit 1 Chip?